Octane Workstops and Ignite Clamps
0:34
Octane Workstops and Ignite Clamps
90.6K views1 month ago
YouTubeOctane Workholding
The Octane Chip Guard is designed to save you time!
0:44
The Octane Chip Guard is designed to save you time!
28.2K views3 months ago
YouTubeOctane Workholding
Facing, Parting Off, Drilling, and Turning can all be improved with properly aligned tools. If a lathe has a Y Axis this alignment is simply an offset, but if it does not the machine may need serviced. | Octane Workholding
0:28
Facing, Parting Off, Drilling, and Turning can all be improved with properly aligned tools. If a lathe has a Y Axis this alignment is simply an offset, but if it does not the machine may need serviced. | Octane Workholding
130.5K views6 months ago
FacebookOctane Workholding
How Wire EDM Works | Octane Workholding
0:14
How Wire EDM Works | Octane Workholding
641.5K views4 months ago
FacebookOctane Workholding
Several Ways to Set Up a Boring Bar
0:26
Several Ways to Set Up a Boring Bar
9.8K views2 months ago
YouTubeOctane Workholding
How Not to Crash a Big Drill 😅
0:29
How Not to Crash a Big Drill 😅
58.2K views2 months ago
YouTubeOctane Workholding
Liquid Metal Workholding by @titanringdesigns
0:31
Liquid Metal Workholding by @titanringdesigns
37.5K views1 month ago
YouTubeOctane Workholding
0:26
Satisfying CNC Machining Process
634.8K views2 months ago
TikTokoctane_workholding
0:28
T-Slot Cover Sale - Save 15% Today
21K views4 weeks ago
YouTubeOctane Workholding
0:29
What's your favorite and least favorite part of this trade?
1.3M views3 months ago
YouTubeOctane Workholding
0:59
Shaft Repair by @belzona
936 views1 month ago
YouTubeOctane Workholding
0:36
The "3 Pass Method" When finishing a part to a specified tolerance, the 3 pass method is commonly used by Machinists. The idea is to make 3 equal depth passes under the same cutting conditions. Adjust the tool offset values accordingly to compensate for any discrepancy between the target value and the recorded value. In this case, we took 3 passes, which were each .025" in depth. The minimum depth of cut should not be less than the tool nose radius utilized. In this case, our nose radius was .01
92K viewsNov 8, 2024
FacebookOctane Workholding
0:29
Peck Tapping 🎯 What is your favorite way to create threads? #machinist #engineering
11.3M viewsSep 1, 2022
TikTokoctane_workholding
Machinist Tips and Tricks Volume 1
2.9M viewsJun 15, 2024
TikTokoctane_workholding
0:32
Same Parameters, Vastly Different Results We've shared countless boring tips and tricks over the years. Steel boring bars have no chance of success even with every tip and tricks applied. While the carbide bar could be made to work at this projection, the speed would need to be reduced and several other methods be employed, it costs productivity. With a vibration damped tools, it just works.
462.7K views4 months ago
TikTokoctane_workholding
0:33
Same Parameters, Vastly Different Results
262.4K views4 months ago
YouTubeOctane Workholding
0:18
Lathe Machining Tips and Tricks | Engineering Tutorial
2.8M viewsMar 1, 2022
TikTokoctane_workholding
0:14
Satisfying Machining #satisfying #lathe #machining
1.5M viewsJul 1, 2022
TikTokoctane_workholding
0:29
Radius Cutter Lathe Tutorial by Ade Swash
203.4K viewsApr 4, 2022
TikTokoctane_workholding
0:13
How Wire EDM Works
268.6K views4 months ago
TikTokoctane_workholding
See more
Static thumbnail place holder